Kia Optima DL3: Light bulbs / Stop and tail lamp (LED type) bulb replacement
If the stop and tail lamp (LED) does not operate, have the vehicle checked by an authorized Kia dealer.
The LED lamp cannot be replaced as a single component because it is an integrated unit. The LED lamp has to be replaced with the unit.
A skilled technician should check or repair stop and tail lamp (LED), for it may damage related parts of the vehicle.
1. Open the trunk lid. 2. Open the service cover. 3. Remove the nuts from the vehicle. 4. Disconnect the rear combination lamp connector. 5.
1. Open the trunk lid. 2. Loosen the retaining screw of the trunk lid cover and then remove the cover. 3. Remove the nuts from the vehicle.
Other information:
Kia Optima DL3 2019-2025 Service and Repair Manual: Integrated Memory Seat (IMS) Switch
Schematic diagrams Connector and Terminal Function Repair procedures Removal When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent dam
Kia Optima DL3 2019-2025 Service and Repair Manual: Blower Motor
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Front Axle Assembly
- Headlamps
- Rear Combination Lamp
- New on site
- Most important about car
