Kia Optima: Engine start/stop button / Starting the engine with a smart key

Kia Optima DL3 2019-2020 Owner's Manual / Driving your vehicle / Engine start/stop button / Starting the engine with a smart key

1.Carry the smart key or place it inside the vehicle.

2.Make sure the parking brake is firmly applied

3.Place the transmission shift lever in P (Park). Depress the brake pedal fully. You can also start the engine when the shift lever is in the N (Neutral) position.

4.Press the engine start/stop button while depressing the brake pedal. It should be started without depressing the accelerator.

5.Do not wait for the engine to warm up while the vehicle remains stationary. Start driving at moderate engine speeds. (Steep accelerating and decelerating should be avoided.)

WARNING - Unintended vehicle movement

Never leave the smart key in the vehicle with children or vehicle occupants who are unfamiliar with the vehicle operation. Pushing the engine start/stop button while the smart key is in the vehicle may result in unintended engine activation and/or unintended vehicle movement.

The side with the lock button should contact the engine start/stop button directly.

When you press the engine start/stop button directly with the smart key, the smart key should contact the button at a right angle.

Do not press the ENGINE START/ STOP button for more than 10 seconds except when the stop lamp fuse is blown.

Engine start/stop button position
OFF To turn off the engine (START/RUN position) or vehicle power (ON position), press the engine start/stop button with the shift lever in the P (Park) position. When you press the engine start/s ...

Automatic transmission
...

Other information:

Kia Optima DL3 2019-2020 Service and Repair Manual: Room Lamp


Repair procedures Removal    When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. 1. Disconnect the negative battery ...

Kia Optima DL3 2019-2020 Owner's Manual: Inner panel fuse replacement


1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. If the switch is located in the “OFF” position, a caution indicator will be displayed in the cluster. To identify the location of a specific fuse, please refer to the inside of the fuse panel cover and ...

Copyright © www.kioptima.com 2017-2020