Kia Optima: Folding key / Transmitter precautions
- The transmitter will not work if any of following occur:
- The ignition key is in the ignition switch.
- You exceed the operating distance limit (about 10 m [30 feet]).
- The battery in the transmitter is weak.
- Other vehicles or objects may be blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a radio transmitter such as a radio substation
or an airport which can interfere with normal operation of the transmitter.
- When the transmitter does not work correctly, open and close the door with
the ignition key. If you have a problem with the transmitter, contact an authorized
Kia dealer.
- If the transmitter is in close proximity to your mobile phone, the signal
could be blocked by your mobile phones normal operational signals. This is especially
important when the phone is active such as making and receiving calls, text
messaging, and/or sending/receiving emails. Avoid placing the transmitter and
your mobile phone in the same pants or jacket pocket and always try to maintain
an adequate distance between the two devices.
CAUTION - Transmitter
Keep the transmitter away from water or any liquid as, it can become damaged
and not function properly.
✽ NOTICE
If the keyless entry system is inoperative due to exposure to water or liquids,
it will not be covered by your manufacturer’s vehicle warranty.
Used to start the engine.
Used to lock and unlock the doors.
To unfold the key, press the release button then the key will unfold automatically.
To fold the key, fold the key manually whil ...
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gentl ...
Other information:
Cruise Indicator Light
This indicator light illuminates:
• When the cruise control system is enabled.
❈For more details, refer to “Cruise Control System” in chapter 5.
Cruise SET Indicator Light
This indicator light illuminates:
• When the cruise control speed is set.
❈For mor ...
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
✽ NOTICE
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
...