Kia Optima: Light bulbs / Headlamp (High beam) bulb replacement

Kia Optima DL3 2019-2025 Owner's Manual / Maintenance / Light bulbs / Headlamp (High beam) bulb replacement

1. Open the hood.

2. Remove the headlamp bulb cover by turning it counterclockwise.

3. Disconnect the headlamp bulb socket-connector.

4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.

5. Install a new bulb-socket assembly in the headlamp assembly by aligning the tabs on the bulb-socket with the slots in the headlamp assembly. Push the bulb-socket into the headlamp assembly and turn the bulb-socket clockwise.

6. Install the headlamp bulb cover by turning it clockwise.

Headlamp (Low beam) bulb replacement
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tab ...

Front turn signal lamp bulb replacement. Position lamp / Day time running lamp (LED type) replacement
Front turn signal lamp bulb replacement If the front turn signal lamp (1) does not operate, have the vehicle checked by an authorized Kia dealer. Position lamp / Day time running lamp (LED type) ...

Other information:

Kia Optima DL3 2019-2025 Owner's Manual: Checking the tire inflation pressure


1.After driving approximately 7 ~ 10 km (4 ~ 6 miles) or about 10 minutes, stop at a suitable location. 2.Connect the filling hose (3) of the compressor (clip mounted side) directly and then connect the filling hose (3) (opposite side) to the tire valve. 3.Connect between compressor and the ve ...

Kia Optima DL3 2019-2025 Service and Repair Manual: High Mounted Stop Lamp


Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Disconnect the high mounted stop lamp connector (A). ...

Copyright © www.kioptima.com 2017-2025