| Replacement |
| 1. |
Open movable glass completely pressing panorama sunroof switch. |
| 2. |
Loosen the mounting screws located at the side of the panorama sunroof deflector.
|
| 3. |
Remove the panoramic sunroof deflector fixing bracket (A) by pushing it upwards like an arrow.
|
| 4. |
To install, reverse the removal procedure. |
Repair procedures Removal • To remove the rear glass, use the tools shown in the following figure: [Tools Composition] ① Square wire ② Insert-type wire grip [Tool Assembly] • Insert and affix square wire ① into the insert hole of the wire grip ②.
Repair procedures Replacement 1. Remove the roof trim. 2. Remove the movable glass. (Refer to Panorama sunroof - "Movable Glass") 3.
Components and components location Components Location 1. Auto logging actuator Description and operation Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging.
Components and components location Components Location 1. Intake actuator Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit.