Kia Optima: Blower / Climate Control Air Filter

Kia Optima DL3 2019-2024 Service and Repair Manual / Heating, Ventilation and Air Conditioning / Blower / Climate Control Air Filter

Description and operation

Description

The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust filter to ensure comfortable interior environment.

Repair procedures

Replacement

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

•	Put on gloves to prevent hand injuries.

1.	Open the glove box and separate the air damper (A) from the glove box.

2.	Press both sides inwards to open the glove box (A) downwards.

3.	Remove the filter cover (A) by pressing the knob.

4.	Replace the air filter (A) with a new one according to the direction of air filter.

To install, reverse the removal procedure.

•	To remove the filter easily, press the right side inward then pull out the filter.

•	In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.

Power Mosfet

Description and operation Description It is installed to the DATC and adjusts the fan rpm by precisely controlling the voltage applied to the blower motor. Repair procedures ...

Intake Actuator

Components and components location Components Location 1. Intake actuator Description and operation Description The intake actuator is loc ...

Other information:

Kia Optima DL3 2019-2024 Service and Repair Manual: Emergency Signal System

Description and operation Description Introduction of quick brake warning system (ESS) In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear. 1. Basic function (Blinking the brake lamp/emergency lamp) ...

Kia Optima DL3 2019-2024 Service and Repair Manual: Drive Belt

Repair procedures Removal and Installation 1. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2. Using the wrench, turning the auto tensioner pulley (A) counterclockwise ...