
The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.
1. Open the rear door.
2. Turn the child safety lock (1) located on the rear edge of the door to the
lock (
) position. When the child safety
lock is in the lock position, the rear door will not open even when the inner door
handle is pulled.
3. Close the rear door.
To open the rear door, pull the outside door handle (2).
Even though the doors may be unlocked, the rear door will not open by pulling the inner door handle until the rear door child safety lock is unlocked.
WARNING - Rear door locks
Use the rear door safety locks whenever children are in the vehicle. If a child accidentally opens the rear doors while the vehicle is moving, the child could suffer severe injuries or death if they fall out of a moving vehicle.
With the door lock button To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark on the button will be visible.
Opening the trunk 1.Make sure the shift lever is in P (Park, for automatic transmission) and set the parking brake. 2.Then do one of the following : - Press the Remote key or Smart Key Trunk Unlock button for more than one second.
Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Components and components location Components Location 1. Auto logging actuator Description and operation Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging.