With the door lock button

WARNING
Do not pull the inner door handle of any door while the vehicle is moving as the door could open causing serious injury or death to occupant.
If a power door lock ever fails to function while you are in the vehicle, try one or more of the following techniques to exit:
WARNING
Do not pull the inner door handle of driver’s (or passenger’s) door while the vehicle is moving.
With central door lock switch

■ Driver side

■ Passenger side
Operate by pressing the central door lock switch.
WARNING - Doors
The doors should always be fully closed and locked while the vehicle is in motion to prevent the accidental opening of the door, which could lead to serious injuries or death.
WARNING - Unattended children/animals
Never leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or severe injury to unattended children or animals who cannot escape the vehicle.
Impact sensing door unlock system
In the event of air bag deployment resulting from a vehicle impact, all doors will automatically unlock.
✽ NOTICE
You can select some auto door lock/unlock features in “User Settings”
❈ For more information, refer to “User Settings” in this chapter.
To remove the cover (For Type C): 1. Pull out the door handle. 2. Press the lever (3) located inside the bottom part of the cover with a key or flat-head screwdriver.
The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.
Repair procedures Inspection 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS). The diagnostic system (KDS) provides the following information. (1) Self diagnosis : Checking failure and code number (DTC).
Components and components location Components Location 1. Mode control actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C co