
When the sunshade is closed
Push the sunroof control lever upward, the sunshade will slide halfway open then the sunroof glass will tilt.
To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily.
When the sunshade is opened
Push the sunroof control lever upward, the sunroof glass will tilt.
To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily.
When the sunshade is closed Push the sunroof control lever backward to the 2nd detent position, and both the sunshade and sunroof glass will slide all the way open.
To close the sunroof glass with the sunshade Push the sunroof control lever forward to the 2nd detent position. The sunroof glass and sunshade will close automatically.
Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remove the lcense lamp (A) by pressing the hook. 3. Disconnect the lcense lamp connector (A).
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.