Kia Optima DL3: Instrument cluster / LCD Display Control
■ Type A
■ Type B
The LCD display modes can be changed by using the control buttons on the steering wheel.
(1)
: MODE button for changing the
LCD MODES
(2)
: MOVE scroll switch for selecting
the items
(3) OK : SET/RESET button for setting the items or resetting the items
❈ For the LCD modes, refer to “LCD Display” in this chapter.
Adjusting Instrument Cluster Illumination The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the ignition switch or Engine Start/Stop button is ON, or the taillights are turned on.
Speedometer The speedometer indicates the speed of the vehicle and is calibrated in kilometers per hour (km/h) and/or miles per hour (mph). Tachometer The tachometer indicates the approximate number of engine revolutions per minute (rpm).
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Ventilated and Heated Seat Switch
Schematic diagrams Connector and Terminal Function [Front Seat] [Ventilation+Heater Type / Non-Heater Type] Pin Function Pin Function Ventilation+Heater Type Non-Heater Type Ventilation+Heater Type Non-Heater Type
Kia Optima DL3 2019-2026 Service and Repair Manual: Receiver-Drier
Repair procedures Replacement 1. Remove the condenser. 2. Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Thermostat
- Automatic Transaxle System
- Cooling System
- New on site
- Most important about car
