Kia Optima: Driver position memory system (for power seat) / Storing positions into memory using the buttons on the door

Kia Optima DL3 2019-2024 Owner's Manual / Safety features of your vehicle / Seat / Driver position memory system (for power seat) / Storing positions into memory using the buttons on the door

Storing driver’s seat positions

1. Shift the shift lever into P (for Automatic transmission) while the engine start/stop button is ON or ignition switch ON.

2. Adjust the driver’s seat and outside rearview mirror comfortable for the driver.

3. Press SET button on the control panel. The system will beep once.

4. Press one of the memory buttons (1 or 2) within 5 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.

When recalling an adjustment memory button while sitting in the vehicle, you can be surprised by the setting chosen if the memory has been adjusted by someone else. If that occurs, immediately push the seat position control knob in the direction of the desired position to stop further undesired movement.

Recalling positions from memory

1. Shift the shift lever into P (for Automatic transmission) while the engine start/stop button is ON or ignition switch ON.

2. To recall the position in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver’s seat will automatically adjust to the stored position.

Adjusting the control switch for the driver’s seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.

Driver position memory system (for power seat)
A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the syste ...

Driver position memory system reset
If the Driver position memory system reset fails to work, initialize the system as follows. How to initialize: 1. Stop the car and open the driver’s door with the Engine start/stop button in O ...

Other information:

Kia Optima DL3 2019-2024 Service and Repair Manual: Front Wheel Speed Sensor


Components and components location Components 1. Front wheel speed sensor 2. Front wheel speed sensor connector Repair procedures Removal and Installation 1. Disconnect the (-) battery terminal. 2. ...

Kia Optima DL3 2019-2024 Service and Repair Manual: Trailing Arm


Repair procedures Removal 1. Disconnect the (-) battery terminal. 2. Remove the rear wheel and tire. (Refer to Tires/Wheels - "Wheel") 3. Remove the under cover (A). 4. Loosen th ...

Copyright © www.kioptima.com 2017-2024