Kia Optima: Steering wheel / Heated steering wheel

Kia Optima DL3 2019-2021 Owner's Manual / Features of your vehicle / Steering wheel / Heated steering wheel

With the ignition switch in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate.

To turn the heated steering wheel off, press the button once again. The indicator on the button will turn off.

WARNING

If the steering wheel becomes too warm, turn the system off. The heated steering wheel may cause burns even at low temperatures, especially if used for long periods of time.

✽ NOTICE

The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.

CAUTION

Do not install any type of grip cover for the steering wheel, it may impair the function of the heated steering wheel system.
When cleaning the heated steering wheel, do not use an organic solvent such as paint thinner, benzene, alcohol and gasoline. Doing so may damage the surface of the steering wheel.
If the surface of the steering wheel is damaged by a sharp object, damage to the heated steering wheel components could occur.

Tilt and telescopic steering

Tilt and telescopic steering allows you to adjust the steering wheel before you drive.You can also raise it to give your legs more room when you exit and enter the vehicle. The steering wheel sho ...

Horn

To sound the horn, press the horn symbols on your steering wheel. Check the horn regularly to be sure it operates properly. ✽ NOTICE To sound the horn, press the area indicated by the horn sym ...

Other information:

Kia Optima DL3 2019-2021 Service and Repair Manual: Disc Brakes and Pads

Repair procedures Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front Brake Disc Thickness Check 1. Check the brake disc for damage and cracks. 2. Remove ...

Kia Optima DL3 2019-2021 Owner's Manual: Seat belts - Front passenger and rear seat 3-point system with combination locking retractor

To fasten your seat belt: Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a combination retractor is also installed in the front passenger seat position, it is strongly recommended that ch ...