Kia Optima DL3: Parking distance warning-reverse / Operation of the parking distance warning-reverse

Operating condition

  • This system will activate when the indicator on the parking distance warning-reverse OFF button is not illuminated. If you desire to deactivate the parking distance warningreverse, press the parking distance warning-reverse OFF button again. (The indicator on the button will illuminate.) To turn the system on, press the button again. (The indicator on the button will go off.)
    If the vehicle is moving at a speed over 5 km/h (3 mph), the system may not be activated.
  • This system will activate when backing up with the ignition switch ON.
    If the vehicle is moving at a speed over 5 km/h (3 mph), the system may not be activated correctly.
  • The sensing distance while the back-up warning system is in operation is approximately 120 cm (47 in.) at the rear bumper center area, 60 cm (23.5 in.) at the rear bumper side area.
  • When more than two objects are sensed at the same time, the closest one will be recognized first.

Types of warning sound

  • When an object is 120 cm to 61 cm (47 in. to 24 in.) from the rear bumper: Buzzer beeps intermittently.
  • When an object is 60 cm to 31 cm (24 in. to 12 in.) from the rear bumper: Buzzer beeps more frequently.
  • When an object is within 40 cm (16 in.) of the rear bumper:
    Buzzer sounds continuously.

    The parking distance warning-reverse assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 120 cm (47 in.

    The parking distance warningreverse may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally once the moisture clears.

    Other information:

    Kia Optima DL3 2019-2026 Service and Repair Manual: License Lamps

    Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remove the lcense lamp (A) by pressing the hook. 3. Disconnect the lcense lamp connector (A).

    Kia Optima DL3 2019-2026 Service and Repair Manual: Smart Key Antenna

    Repair procedures Removal Interior Antenna 1 1. Disconnect the negative battery terminal. 2. Remove the surround view monitor (SVM) unit. (Refer to Advanced Driver Assistance System (ADAS) - "Surround View Monitor (SVM) Unit") 3.

    Categories

     
    Copyright © 2026 www.kioptima.com - 0.0245