Kia Optima DL3: Manual heating and air conditioning / Sunroof inside air recirculation, Fan speed control
Sunroof inside air recirculation
The outside (fresh) air position is automatically selected, when the sunroof is opened.
When you select the recirculated air position, the system maintains the recirculated air position for 3 minutes and then automatically converts to the outside (fresh) air position.
When the sunroof is closed, the air intake position will return to the original position that was selected.
Fan speed control
The fan speed can be set to the desired speed by operating the fan speed control buttons.
To change the fan speed, press (
)
the button for higher speed, or push (
)
the button for lower speed. To turn the fan speed control off, press the front blower
OFF button.
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Press the A/C button to turn the air conditioning system on (indicator light will illuminate). Press the button again to turn the air conditioning system off.
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Room Lamp
Repair procedures Removal When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. 1.
Kia Optima DL3 2019-2026 Service and Repair Manual: In-car Sensor
Description and operation Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater co
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Heating, Ventilation and Air Conditioning
- Front Axle Assembly
- Body Electrical System
- New on site
- Most important about car
