Kia Optima DL3: Interior features / USB charger
■ Front seat
■ Rear seat
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.The electrical devices can be recharged when the Engine Start/Stop button is in ACC/ON/START position.
The battery charging state may be monitored on the electrical device.
Disconnect the USB cable from the USB port after use.
- Some devices are not supported for fast charging but will be charged with normal speed.
- Use the USB charger when the engine is running to prevent battery discharge.
- Only devices that fit the USB port can be used.
- The USB charger can be used only for battery charging purposes.
■ Front seat ■ Rear seat The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems.
❈ This actual feature may differ from the illustration. To use the coat hook, pull down the upper portion of coat hook. CAUTION - Hanging clothing Do not hang heavy clothes, since they may damage the hook.
Other information:
Kia Optima DL3 2019-2025 Service and Repair Manual: Panorama Sunroof Motor
Schematic diagrams Connector and Terminal Function Repair procedures Inspection 1. Disconnect the negative battery terminal. 2. Remove the rear pillar trim [LH]. (Refer to Body - "Rear Pillar Trim") 3.
Kia Optima DL3 2019-2025 Service and Repair Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Body Electrical System
- ESCL(Electronic Steering Column Lock)
- Engine Control / Fuel System
- New on site
- Most important about car
