Kia Optima: Rear Seat / Rear Seat Cushion Cover

Kia Optima DL3 2019-2025 Service and Repair Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Cushion Cover

Components and components location

Component Location

1. Rear seat cushion cover

Repair procedures

Replacement

1.	Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Loosen the mounting screws and remove the car seat fixing bracket (A).

Remove the rear seat cushion cover hog-ring clips and remove the rear seat cushion cover (A).

Be careful not to deviate from the pads, insert wires, and aplix.

[Rear]

[Front]

To install, reverse the removal procedure.

•	To prevent wrinkles, make sure that the cover (B) is stretched evenly before connecting the hog-ring clips (A).

•	Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).

Rear Seat Back Cover

Components and components location Component Location 1. Rear seat back cover Repair procedures Replacement 1. Remove the r ...

Front Seat Belt

Components and components location Components 1. Front seat belt retractor 2. Height adjust 3. Rear seat belt buckle [LH] 4. Rear seat belt buckle [RH] ...

Other information:

Kia Optima DL3 2019-2025 Service and Repair Manual: Power Seat Motor

Components and components location Components 1. Lumbar support motor 2. Reclining motor 3. Front height motor 4. Rear height motor 5. Slide motor Repair procedures Inspection 1. Disconnect the negative batt ...

Kia Optima DL3 2019-2025 Service and Repair Manual: Surround View Monitor (SVM)

Components and components location Component Location Surround View Monitor (SVM) 1) SVM unit basically transmits data via C-CAN only. • ...