Kia Optima: Features of your vehicle / Welcome system

Kia Optima DL3 2019-2021 Owner's Manual / Features of your vehicle / Welcome system

Headlight (Headlamp) escort function

The headlights (and/or taillights) remain on for approximately 5 minutes after the ignition key is removed or turned to the ACC or LOCK position. However, if the driver’s door is opened and closed, the headlights are turned off after 15 seconds.

The headlights can be turned off by pressing the lock button on the transmitter or smart key twice or turning off the light switch from the headlight or Auto light position.

Interior light

When the interior light switch is in the DOOR position and all doors (and trunk) are locked and closed, the room lamp will come on for 30 seconds if any of the following occurs:

At this time, if you press the door lock button, the lamps will turn off immediately.

Pocket lamp

When all doors are locked and closed, the pocket lamp will come on for 15 seconds if any of the following occurs:

• With the smart key system

- When the door unlock button is pressed on the smart key.
- When the button of the outside door handle is pressed.

At this time, if you press the door lock button, the lamps will turn off immediately.

Glove box lamp
The glove box lamp comes on when the glove box is opened. To prevent unnecessary battery drain, close the glove box securely after using the glove box. ...

Defroster
CAUTION - Conductors To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ...

Other information:

Kia Optima DL3 2019-2021 Owner's Manual: Inside rearview mirror


Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving. Do not place objects in the rear seat or cargo area which would interfere with your vision through the rear window. WARNING - Mirror adjustment Do not adjust the ...

Kia Optima DL3 2019-2021 Service and Repair Manual: Accelerator Position Sensor (APS)


Specifications Specification Accelerator Output Voltage (V) [Vref = 5.0V] Position APS1 APS2 C.T 0.7 - 0.8 0.33 - 0.43 W.O.T 4.13 - 4.22 ...

Copyright © www.kioptima.com 2017-2021