Other information:
Repair procedures
Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the stabilizer bar bushing (A).
Tightening torque :
7.8 - 9.8 N.m (4.5 - 5.5 kgf.m, 5.8 - 7.2 lb-ft)
...
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It remains on until the engine is started.
When there is a malfunction with either the alternator or electrical charging
system.
If there is a malfunction with either th ...