Kia Optima DL3: Body Side Molding / Front Mud Guard

Kia Optima DL3 2019-2026 Service and Repair Manual / Body (Interior and Exterior) / Body Side Molding / Front Mud Guard

Repair procedures

Replacement
  

Put on gloves to protect your hands.

  
•

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•

Take care not to bend or scratch the trim and panels.

•

Remove the side seal moulding with the front and rear door full open.

1.

After loosening the mounting screws, remove the front mud guard (A).

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

    Repair procedures Replacement    Put on gloves to prevent hand injuries.

    Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

    Other information:

    Kia Optima DL3 2019-2026 Service and Repair Manual: Hazard Lamp Switch

    Schematic diagrams Connector and Terminal Function Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remove the crash pad garnish [RH]. (Refer to Body - "Crash Pad Garnish") 3.

    Kia Optima DL3 2019-2026 Service and Repair Manual: Refrigerant Line

    Components and components location Components Location 1. Suction & Liquid tube assembly 2. Discharge hose Repair procedures Replacement 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minute

    Categories

     
    Copyright © 2026 www.kioptima.com - 0.029