Kia Optima DL3: Indicator Lights / Electronic Stability Control (ESC) Indicator Light
This indicator light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off. - When there is a malfunction with the ESC system.
In this case, have your vehicle inspected by an authorized Kia dealer.
This indicator light blinks:
While the ESC is operating.
❈For more details, refer to “Electronic Stability Control (ESC)” in chapter 5.
Electronic Stability Control (ESC) OFF Indicator Light This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Power Door Mirror Switch
Schematic diagrams Connector and Terminal Function Pin Function 1 B-CAN (Low) 2 B-CAN (High) 3 Ground (Assist safety) 4 Assist safety 5 LIN (For IMS)
Kia Optima DL3 2019-2026 Service and Repair Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Suspension System
- Body (Interior and Exterior)
- Front Axle Assembly
- New on site
- Most important about car
