Master Warning light • This warning light informs the driver of the following situations - Forward Collision-Avoidance Assist malfunction - Blind-Spot Collision Warning radar blind - Lamp malfunction - High Beam Assist malfunction - Tire Pressure Monitoring System (TPMS) malfunction - Electronic Control Suspension (ECS) malfunction The Master Warning Light illuminates if one or more of the above warning situations occur.
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off.
Components and components location Component Location 1. Heater unit assembly Compoents 1. Mode control actuator 2. Temperature control actuator [LH] 3. PTC Heater dummy 4.
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Loosen the mounting screws, lock pin and remove the evaporator core cover (A).