| Inspection |
Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
Repair procedures Inspection 1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
Repair procedures Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more.
Schematic diagrams Connector and Terminal Function Repair procedures Inspection 1. Disconnect the negative battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3.
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.