Kia Optima DL3: Front Seat Belt / Height Adjust

Repair procedures

Replacement
1.

Remove the front seat belt retractor.

(Refer to Front Seat Belt - "Front Seat Belt Retractor")

2.

Loosen the mounting bolts, remove the height adjust (A).

Tightening torque :

39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)

3.

To install, reverse the removal procedure.

    Components and components location Component Location 1. Front seat belt retractor Repair procedures Replacement    Be careful not to damage the retractor when removing or installing the seat belt.

    Components and components location Component Location 1. Front seat belt buckle Repair procedures Replacement    • When installing the belt, make sure not to damage the retractor.

    Other information:

    Kia Optima DL3 2019-2025 Service and Repair Manual: Trunk Room Lamp

    Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remove the trunk room lamp (A) by pressing the hook. 3. Disconnect the trunk room lamp connector (A).

    Kia Optima DL3 2019-2025 Service and Repair Manual: Mood Lamp Unit

    Schematic diagrams Connector and Terminal function Repair procedures Removal    When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

    Categories

     
    Copyright © 2025 www.kioptima.com - 0.0184