Kia Optima DL3: Warning lights / Low Tire Pressure Warning Light

This warning light illuminates:

  • Once you set the ignition switch or Engine Start/Stop Button to the ON position.
    - It illuminates for approximately 3 seconds and then goes off.
  • When one or more of your tires are significantly underinflated.

❈For more details, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 6.

This warning light remains on after blinking for approximately 60 seconds or repeats blinking on and off at the intervals of approximately 3 seconds:

• When there is a malfunction with the TPMS.

In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible.

❈For more details, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 6.

WARNING - Low tire pressure

  • Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances.
  • Continued driving on low pressure tires will cause the tires to overheat and fail.

 

  • The TPMS cannot alert you to severe and sudden tire damage caused by external factors.
  • If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road.

    This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started.

    Master Warning light • This warning light informs the driver of the following situations - Forward Collision-Avoidance Assist malfunction - Blind-Spot Collision Warning radar blind - Lamp malfunction - High Beam Assist malfunction - Tire Pressure Monitoring System (TPMS) malfunction - Electronic Control Suspension (ECS) malfunction The Master Warning Light illuminates if one or more of the above warning situations occur.

    Other information:

    Kia Optima DL3 2019-2025 Service and Repair Manual: Keyless Entry And Burglar Alarm

    Specifications Specification Item Specification Operating temperature 14 - 140°F (-10 - 60°C) RF Modulation FSK RF Frequency 433.

    Kia Optima DL3 2019-2025 Service and Repair Manual: Power Window Switch

    Schematic diagrams Connector and Terminal Function Power Window Main Switch Pin Function 1 B-CAN (Low) 2 B-CAN (High) 3 Ground (Assist safety) 4 Assist safety 5

    Categories

     
    Copyright © 2025 www.kioptima.com - 0.0213