Kia Optima DL3: Outside rearview mirror / Reverse parking aid function

While the vehicle is moving in reverse, the outside rearview mirror( s) will move downward to aid reverse parking. According to the position of the outside rearview mirror switch, the outside rearview mirror( s) will operate as follows:

L/R : When the remote control outside rearview mirror switch is selected to the L (left) or R (right) position, both outside rearview mirrors will move downward.

Neutral : When the remote control outside rearview mirror switch is placed in the middle position, the outside rearview mirrors will not operate while the vehicle is moving rearward.

The outside rearview mirrors will automatically revert to their original positions under the following conditions:

1. The ignition switch is in the OFF position.

2. Shift lever is moved to any position except R (Reverse).

3. Remote control outside rearview mirror switch is placed in the middle position.

    The electric remote control mirror switch allows you to adjust the position of the left and right outside rearview mirrors. To adjust the position of either mirror, press the R or L button (1) to select the right side mirror or the left side mirror, then press a corresponding point ( ) on the mirror adjustment control to position the selected mirror up, down, left or right.

    Electric type The outside rearview mirror can be folded or unfolded by pressing the switch when the ignition switch is ACC or ON position as below.

    Other information:

    Kia Optima DL3 2019-2026 Service and Repair Manual: Heater Core

    Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Loosen the mounting screws and remove the heater core cover (A).

    Kia Optima DL3 2019-2026 Service and Repair Manual: Evaporator Core

    Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Loosen the mounting screws, lock pin and remove the evaporator core cover (A).

    Categories

     
    Copyright © 2026 www.kioptima.com - 0.0234