Kia Optima DL3: Light bulbs / Vanity mirror lamp bulb replacement
WARNING - Interior lamps
Prior to working on the Interior lamps, ensure that the “OFF” button is pressed to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
✽ NOTICE
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
High mounted stop lamp (LED type) bulb replacement If the high mounted stop lamp (LED) does not operate, have the vehicle checked by an authorized Kia dealer.
Room lamp bulb replacement ■ Type A ■ Type B WARNING - Interior lamps Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Compressor oil
Repair procedures Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model.
Kia Optima DL3 2019-2026 Service and Repair Manual: Condenser
Components and components location Components Location 1. Condenser Repair procedures Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Rear Bumper Assembly
- Engine Control / Fuel System
- Steering System
- New on site
- Most important about car
