Kia Optima: Maintenance services / Owner’s responsibility
✽ NOTICE
Maintenance Service and Record Retention are the owner's responsibility.
You should retain documents that show proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance service charts shown on the following pages. You need this information to establish your compliance with the servicing and maintenance requirements of your vehicle warranties.
Detailed warranty information is provided in your Warranty & Consumer Information manual.
Repairs and adjustments required as a result of improper maintenance or a lack of required maintenance are not covered.
We recommend you have your vehicle maintained and repaired by an authorized Kia dealer. An authorized Kia dealer meets Kia’s high service quality standards and receives technical support from Kia in order to provide you with a high level of service satisfaction.
Maintenance services
You should exercise the utmost care to prevent damage to your vehicle and injury
to yourself whenever performing any maintenance or inspection procedures.
Should you have any doubts concerning the ...
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedu ...
Other information:
Kia Optima DL3 2019-2021 Owner's Manual: FCA sensor (Front View Camera)
In order for the FCA system to operate properly, always make sure the sensor are clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the sensor of its external parts may adversely affect the sensing performance of the sensor. ✽ NOTICE Never install any access ...
Kia Optima DL3 2019-2021 Owner's Manual: System operation
Ventilation 1.Set the mode to the position. 2.Set the air intake control to the outside (fresh) air position. 3.Set the temperature control to the desired position. 4.Set the fan speed control to the desired speed. Heating 1.Set the mode to the position. 2.Set the air intake control to the ...