Other information:
When the sensor is blocked with dirt, snow, or debris, the FCA system operation
may stop temporarily.
If this occurs, a warning message will appear on the LCD display.
The system will operate normally when such dirt, snow or debris is removed.
However, the FCA system may not properly operate ...
1. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
✽ NOTICE
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
...