Kia Optima DL3: Chassis / Suspension Mounting Bolts
Repair procedures
| Inspection |
Visually check the loose mount bolt.
Repair procedures Inspection 1. Visually check to be sure that there are no flaws and cracks that may cause injury.
Repair procedures Inspection 1. Check the tire pressure. Tire Pressure Tire Front Rear 205/65 R16 250 kPa (35 psi) 250 kPa (35 psi) 215/55 R17 250 kPa (35 psi) 250 kPa (35 psi) 215/60 R16 250 kPa (35 psi) 250 kPa (35 psi) 235/45 R18 250 kPa (35 psi) 250 kPa (35 psi) Tire Rotation Checking For Pull And Wander If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.
Other information:
Kia Optima DL3 2019-2025 Service and Repair Manual: Evaporator Core
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Loosen the mounting screws, lock pin and remove the evaporator core cover (A).
Kia Optima DL3 2019-2025 Service and Repair Manual: Blower Unit
Components and components location Component Location 1. Blower unit assembly Components 1. Intake actuator 2. Cluster ionizer 3. Air filter 4. Blower motor assembly 5.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Rear Combination Lamp
- Front Door Outside Handle
- Maintenance
- New on site
- Most important about car
