
■ Front seat

■ Rear seat
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.The electrical devices can be recharged when the Engine Start/Stop button is in ACC/ON/START position.
The battery charging state may be monitored on the electrical device.
Disconnect the USB cable from the USB port after use.
■ Front seat ■ Rear seat The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems.
❈ This actual feature may differ from the illustration. To use the coat hook, pull down the upper portion of coat hook. CAUTION - Hanging clothing Do not hang heavy clothes, since they may damage the hook.
Repair procedures Inspection 1. Remove the front seat back. (Refer to Body - "Front Seat Back Cover") 2. Disconnect the connector (A). 3. When the battery power is supplied to the motor connector, check the motor for smooth operation.
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Loosen the mounting screws, lock pin and remove the evaporator core cover (A).