
This indicator light illuminates for up to 30 seconds:
• When the vehicle detects the appropriate smart key with immobilizer in your vehicle while the Engine Start/Stop Button is ACC or ON.
- At this time, you can start the engine.
- The indicator light goes off after starting the engine.
This indicator light blinks for a few seconds:
• When the smart key is not in the vehicle.
- At this time, you can not start the engine.
This indicator light illuminates for 2 seconds and goes off:
• When the vehicle can not detect the smart key which is in the vehicle while the Engine Start/Stop Button is ON.
In this case, have your vehicle inspected by an authorized Kia dealer.
This indicator light blinks:
In this case, have your vehicle inspected by an authorized Kia dealer.
Electronic Stability Control (ESC) OFF Indicator Light This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.
Turn Signal Indicator Light This indicator light blinks: • When you turn the turn signal light on. If any of the following occurs, there may be a malfunction with the turn signal system.
Schematic diagrams Connector and Terminal Function Pin Function 1 B-CAN (Low) 2 B-CAN (High) 3 Ground (Assist safety) 4 Assist safety 5 LIN (For IMS)
Components and components location Component Location 1. Walk-in switch Repair procedures Removal When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply prote