Kia Optima: Driver Attention Warning (DAW) / System malfunction

Kia Optima DL3 2019-2020 Owner's Manual / Driving your vehicle / Driver Attention Warning (DAW) / System malfunction

When the “Check System” warning message appears, the system is not working properly. In this case, take your vehicle to an authorized Kia dealer and have the system checked.

WARNING

✽ NOTICE

The Driver Attention Warning system utilizes the camera sensor on the front windshield for its operation. To keep the camera sensor in the best condition, you should observe the followings:

- Do not disassemble camera temporarily for tinted window or attaching any types of coatings and accessories. If you disassemble a camera and assemble it again, take your vehicle to an authorized Kia dealer and have the system checked.
- Do not locate any reflective objects (i.e. white paper, mirror) over the dashboard. Any light reflection may cause a mal-function of the Driver Attention Warning (DAW) system.
- Pay extreme caution to keep the camera sensor out of water.
- Do not arbitrarily disassemble the camera assembly, nor apply any impact on the camera assembly.

• Playing the vehicle audio system at high volume may offset the Driver Attention Warning system warning sounds.

CAUTION

The Driver Attention Warning system may not properly operate with limited alerting in the following situations:

✽ NOTICE

The Driver Attention Warning system does not detect actual driver fatigue or drowsiness. The system monitors driving and provides a warning if it detects inattentive driving practices.

Resetting the system
The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning system. The driver attention warning ...

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many kilometers (miles) you can get from a liter (gallon ...

Other information:

Kia Optima DL3 2019-2020 Service and Repair Manual: Alternator


Description and operation Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of this alternator is regulated by the battery voltage ...

Kia Optima DL3 2019-2020 Service and Repair Manual: Rear Seat Back Cover


Components and components location Component Location 1. Rear seat back cover Repair procedures Replacement 1. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly") 2. ...

Copyright © www.kioptima.com 2017-2020