Kia Optima: Maintenance / Chassis

Kia Optima DL3 2019-2020 Service and Repair Manual / Maintenance / Chassis

Vapor Hose and Fuel Filler Cap
Repair procedures Inspection Vapor hose 1. Check all the clamps for tightness and the connections for leakage. 2. Visually check the vapor li ...

Brake/Clutch Fluid
Repair procedures Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use ...

Other information:

Kia Optima DL3 2019-2020 Service and Repair Manual: Drive plate


Components and components location Components 1. Adapter plate 2. Drive plate Repair procedures Removal and Installation 1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle ...

Kia Optima DL3 2019-2020 Owner's Manual: Limp home (override) procedure


When you turn the ignition switch to the ON position, if the immobilizer indicator () goes off after blinking 5 times, your transponder equipped in the ignition key is out of order. You cannot start the engine without the limp home procedure. To start the engine, you have to input your passwor ...

Copyright © www.kioptima.com 2017-2020