Kia Optima DL3: Maintenance
Kia Optima DL3 2019-2026 Service and Repair Manual / Maintenance
- Power Train
- Air Cleaner Filter
- Battery
- Cooling System
- Drive Belt
- Engine Oil and Filter
- Exhaust System
- Fuel Lines, Hoses and Connections
- Spark Plug
- Automatic Transaxle Fluid
- Vapor Hose and Fuel Filler Cap
- Chassis
- Brake/Clutch Fluid
- Brake Lines, Hoses and Connections
- Disc Brakes and Pads
- Parking Brake
- Drive Shafts and Boots
- Steering Gear Rack, Linkage and Boots
- Suspension Ball Joints
- Suspension Mounting Bolts
- Tire (pressure & tread wear)
- Air Conditioner Refrigerant/Compressor
- Climate Control Air Filter
- Maintenance Schedule
Components and components location Component Location 1. Cluster (USM) 2. Parking collision-avoidance assist (PCA) Unit 3.
Other information:
Kia Optima DL3 2019-2026 Service and Repair Manual: Smart Key
Repair procedures Adjustment Smart Key Code Saving 1. Connect the VCI II in driver side crash pad lower panel, turn the power on KDS. 2. Select the vehicle model and then do "Smart key code saving".
Kia Optima DL3 2019-2026 Service and Repair Manual: Blower Resistor
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) (1) Pin No 1.
Categories
- Manuals Home
- Kia Optima Owners Manual
- Kia Optima Service Manual
- Rear Bumper Assembly
- Charging System
- Brake System
- New on site
- Most important about car
Copyright © 2026 www.kioptima.com - 0.0436