Kia Optima: Body Electrical System / Headlamp Leveling System

Kia Optima DL3 2019-2023 Service and Repair Manual / Body Electrical System / Headlamp Leveling System

Schematic diagrams
Connector and Terminal Function

Repair procedures
Removal
1.

Disconnect the negative battery terminal.

2.

Remove the crash pad lower panel.

(Refer to Body - "Crash Pad Lower Panel")

3.

Remove the crash pad garnish [LH].

(Refer to Body - "Crash Pad Garnish")

4.

Remove the crash pad lower garnish [LH] (A) by loosening the mounting screw.

5.

Disconnect the connector (A) from the crash pad lower garnish [LH].

6.

Remove the side crash pad switch (A) by loosening the mounting screws.

Installation
1.

Install in the reverse of the removal.

Fuel Filler Door Unlock Actuator
Repair procedures Removal 1. Disconnect the negative battery terminal. 2. Remvoe the fuel door housing. (Refer to Body - "Fuel Filler Door&q ...

Head Up Display System
Components and components location Components Location 1. Rain sensor 2. Head up display (HUD) unit 3. Instrument cluster Description and operat ...

Other information:

Kia Optima DL3 2019-2023 Service and Repair Manual: Blower Motor


Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. ...

Kia Optima DL3 2019-2023 Owner's Manual: Operating door locks from outside the vehicle


To remove the cover (For Type C): 1. Pull out the door handle. 2. Press the lever (3) located inside the bottom part of the cover with a key or flat-head screwdriver. 3. Push out the cover while pressing the lever. Turn the key clockwise to lock (1) and counterclockwise to unlock (2). I ...

Copyright © www.kioptima.com 2017-2023