Components and components location Components 1. Rear brake disc 2. Hub bearing assembly 3. Dust cover 4. Rear carrier Repair procedures Removal 1.
Components and components location Components 1. Front driveshaft (LH) 2. Front driveshaft (RH) Repair procedures Removal 1.
Schematic diagrams Connector and Terminal Function Repair procedures Inspection 1. Remove the overhead console lamp. (Refer to Lighting System - "Overhead Console Lamp") 2. Check for continuity between the terminals in each switch position according to the table
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) (1) Pin No 1.