Repair procedures Replacement 1. If the E-Call switch needs to be replaced, replace the overhead console lamp assembly.
Components and components location Components Location 1. Engine room junction block Repair procedures Inspection Power Relay (Type A) Check for continuity between the terminals.
Components and components location Component Location 1. Walk-in switch Repair procedures Removal When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply prote
Components and components location Components Connector Pin Function [Connector A] Pin NO Funtion Pin NO Funtion 1 Ground 11 Ground 2 Clean signal 12 -