Kia Optima: Indicator Lights / Turn Signal Indicator Light, High Beam Indicator Light

Kia Optima DL3 2019-2020 Owner's Manual / Features of your vehicle / Indicator Lights / Turn Signal Indicator Light, High Beam Indicator Light

Turn Signal Indicator Light

This indicator light blinks:

• When you turn the turn signal light on.

If any of the following occurs, there may be a malfunction with the turn signal system. In this case, have your vehicle inspected by an authorized Kia dealer.

- The indicator light does not blink but illuminates.
- The indicator light blinks more rapidly.
- The indicator light does not illuminate at all.

High Beam Indicator Light

This indicator light illuminates:

Immobilizer Indicator Light (With Smart Key)
This indicator light illuminates for up to 30 seconds: • When the vehicle detects the appropriate smart key with immobilizer in your vehicle while the Engine Start/Stop Button is ACC or ON. - ...

High beam assist indicator, Front Fog Indicator Light, Light ON Indicator Light
High beam assist indicator This warning light illuminates : When the high-Beam is on with the light switch in the AUTO light position. If your vehicle detects oncoming or preceding vehicles, ...

Other information:

Kia Optima DL3 2019-2020 Service and Repair Manual: Disc Brakes and Pads


Repair procedures Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front Brake Disc Thickness Check 1. Check the brake disc for damage and cracks. 2. Remove ...

Kia Optima DL3 2019-2020 Service and Repair Manual: Heated Oxygen Sensor (HO2S)


Description and operation Description • Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect the air/fuel ratio and send it to the ECM. ...

Copyright © www.kioptima.com 2017-2020