| Inspection |
| 1. |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage. |
| 2. |
Check for unusual exhaust sounds or abnormal exhaust fumes. |
Repair procedures Inspection 1. Check the engine oil quality. Check the oil deterioration, entry of water, discoloring of thinning.
Repair procedures Inspection Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
Components and components location Components Location 1. Mode control actuator Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C co
Components and components location Components Connector Pin Function [Connector A] Pin NO Funtion Pin NO Funtion 1 Ground 11 Ground 2 Clean signal 12 -